Research Profile and Infrastructure
INSTITUTE OF PHYSICAL METALLURGY, METALFORMING AND NANOTECHNOLOGY
Prof. ZOLTÁN GÁCSI / femtangz@uni-miskolc.hu
- Developing environmental friendly solder materials for the automotive industry
- Solving material scientific problems of solder materials and solder joints
- Calculating phase diagrams using ESTPHAD
- FEM modelling of melt flows in melts stirred with rotating magnetic field
- Directional crystallization experiments in rotating magnetic field
- Fine structure analysis / failure analysis of metallic components
- Examinations on phase transformations of TRIP/TWIP steels and SMAs
- Sampling-free measurement of residual stresses by X-ray diffraction
- Optimisation of lifetime enhancing technologies
- Investigating the evolution of residual stresses during fatigue
- Researches on amorphous metals / MMCs / nitridizing technologies
- OPTICAL MICROSCOPE / SEM WITH EDS / TEM / AFM / RAMAN SPECTROMETER / DSC
- XRD TEXTURE / ODF / RESIDUAL STRESS
- HARDNESS TESTER / UNIVERSAL MECHANICAL TESTER WITH FURNACE AND CLIMATE CHAMBER
- CRYSTALLIZER WITH ROTATING MAGNETIC FIELD
INSTITUTE OF ENERGY AND QUALITY AFFAIRS
Prof. ÁRPÁD BENCE PALOTÁS / arpad.palotas@uni-miskolc.hu
- Research on the potentials of energy utilization of low quality brown coal
- Research on the renewable-based heat supply of small settlements, with prime focus on biomass-based heating
- The remediation of heavy metal contaminated industrial sites by applying phytoextraction
- Research on the material processing and secondary utilization of rubber waste
- Urban air quality: prevention and/ or removal of smog
- Solar to thermal conversion: researhes on solar panels, solar parabolic dishes
- Solar to electricity includes photovoltaics: researches on stirling engines, artificial photosynthesis
- Waste energy harvesitng options: researches on piezzoelectric floor, traffic lanes / wind energy
- Utilization of geothermal energy
- DERIVATOGRAPH / TG / DTA / TMA/ CALORIMETER / PYROMETER / GAS CHROMATOGRAPH
- CHNSO ANALYZER / FLUE GAS ANALYZER
- ASH FUSIBILITY TESTING INSTRUMENT
- ELECTRIC FURNACE / SOLAR SYSTEMS
- EXPERIMENTAL PELLET FIREBOILER
- HOT BENDING / MULTIFUNCTIONAL TESTER
INSTITUTE OF METALLURGICAL AND FOUNDRY ENGINEERING
Prof. TAMÁS KÉKESI / kekesi@uni-miskolc.hu
- Developing foundry technologies / casting simulations / high pressure and die casting technologies
- Researches on moulding materials
- Melting and melt treatment technology optimization
- Calculation of thermal- and casting technology parameters
- Examination of sand reclamation
- Waste disposal and technological utilization
- Definition of HDPC technological parameters on casting part properties
- Casting defect analysis
- Developing environmental friendly and efficient recycling methods of metals from primary and secondary resources
- Studying physical and chemical processes of plasma treatments
- Developing coatings for different substrates
- LOW PRESSURE DENSITY DETERMINTATION
- CAD DATA COLLECTION SYSTEM FOR MEAUSEREMENT AND EVALUATION OF PHYSICAL PARAMETERS
- WINCAST / NOVAFLOW&SOLID / FLOW3D
CHEMICAL INSTITUTE
Prof. JÁNOS LAKATOS / mtasotak@uni-miskolc.hu
- Development of active materials of reactive barriers focusing on the dead biomass and coals
- Research on atomspectrometric sources, development of emission-spectrometric analytical methods
- Chemical synthesis in microreactor
- Studies on chemical degradability of antibiotics and pesticides
- Examinations on the possibilities of removing EDC and PPCP materials from waters
- Developing an electrochemical method and related equipment to demolish organic water contaminations, production and application of carbon nanosorbents and catalysts
- ICP WITH AN AXIALLY VIEWED TORCH
- NANO PARTICLE SIZE ANALYSER AND ZETA-SIZER
- LIQUID CHROMATOGRAPH
- FTIR
- SURFACE AREA AND POROSITY ANALYSER
- GA CHROMATOGRAPH-MS FID, ECD AND MSD DETECTOR
- LIQUID PHASE MICROREACTOR
INSTITUTE OF CERAMICS AND POLYMER ENGINEERING
Dr. TAMÁS SZABÓ / polsztam@uni-miskolc.hu
- Evaluation of hetero-modulus ceramics
- Development of technical ceramics
- Designing environmental friendly construction materials
- Research and development in the field of nonmetallic prosthetic implant materials, main focus on uhmwpe polymer products
- Development of implant wear and life cycle evaluating applications and equipments
- Recycling and processing of secondary raw polymeric materials
- Monitoring of changes in chemical and mechanical properties of technical polymers during recycling
- Process evaluation and testing of polymer components for the automotive industry
- DMA / THERMAL CUNDUCTIVITY MEASURER
- INSTRUMENTED IMPACT TESTER / SCRATCH TESTER
- TRIBOMETER / POROSIMETER / LASER DILATOMETER / DSC / HEATING MICROSCOPE
- SEM WITH EDS PROBE / XRD
- DEPOLARIZATION SPECTROMETER / FTIR / RAMAN
- INJECTION MOLDING APPARATUS
